0013

UL Listed SMD LED Tape Light

ETL Ribbon Tape 1 08a5f8b1-f435-4dab-93c7-4b141433683a02
vanessas-bistro-walnut-creek_1000px-copy
Under Cabinet 1

INSTALLATION GUIDE FOR ETL TAPE

INSTALLATION GUIDE FOR RGB ETL TAPE

24v RGB Tape Light

The waterproof LED flexible ribbon incorporates a silicon flexible circuit board and 5050 SMD LED technology.  It can be bent to a maximum radius of 2cm.  The SMD LED’s are dimmable (255 levels) and color controllable using linear modulation covering the entire RGB visual spectrum. It is field cuttable, and can be scaled or field altered to virtually any application, while maintaining the UL Listing for inspection.  Waterproof permanent mounting accessories are available. The standard  waterproof connector plug and lead wires attached help support a reliable wet location solution.

24v rgb-wet-location th
nightclub-3_1000px

ETL 24v RGB Tape

24v RGB Ribbon Specs & Pricing

INDOOR VERSION 60 LEDs/meter
Power: 24VDC, Max power - 4.32W/ft
Cuttable Every 4”
Beam Angle: 120° / Lumens/Ft=160
UL Listing 2108
5m (16.4’) Roll: $250.00   
SPEC SHEET

OUTDOOR VERSION 60 LEDs/meter
Power: 24VDC, Max power=4.32W/Ft
Cuttable Every 4”
Beam Angle: 120° / Lumens/Ft=160
UL Listing 2108
5m (16.4’) Roll: $325.00     

24v RGBWhite Ribbon Specs & Pricing

24v-rgbw
RGBW Tape Light

3000K 5050 White chip plus
 RGB 5050 TriColor Chip

RGBW Tape Light 2th

RGBW cutting points

ETL 24v RGBW Tape

INDOOR VERSION 60 LEDs/meter
Power: 24VDC, Max power=4.39W/Ftr
Cuttable Every 8”
Beam Angle: 120°/  198 Lumens/Ft Max
UL Listing 2108
6.1m (20’) Roll: $350.00     

UL White Tape Light

ETL Ribbon Tape 403 ETL Ribbon Tape 5

UL DD 3528 is our most versatile and popular 12 Volt low voltage tape lighting solution. At 200 lumens per foot of dimmable 80+ CRI light  output, UL DD 3528 offers a combination of high light output and high quality white light. It is available in a warm 2700K option and offers stepped color temperatures up to a cool 5000K dimmable white light. UL DD 3528 comes in solid color light output version of red, green, and blue light.
UL DD 3528 produces a high efficacy, dimmable, high lumen light, making it an excellent tape light solution for everything from dimmed ambient lighting to full brightness task oriented and fill-light applications.
UL DD 3528 is certified as field cuttable, and can be scaled or field  altered to virtually any sized application, while maintaining the integrity of the ETL Listing for inspection. Each spool of UL DD 3528 comes with 3M adhesive backing, along with a DC plug and attached lead wires, which create an instant plug-and-play solution.

12v indoor 3528 th

Double Density-Dry 3528

12v indoor 3528

Single Density-Dry 3528

architectural grade 24v premium th

Architectural Grade 24v

    INDOOR Blaze 120 LEDs/meter
    Power: 12VDC, Max power=2.88W/FT
    Epistar 3528 SMD chip  / 2400K, 2700K, 3000K, 3300K, 3500K, 3800K, 4200K, 5000K, 6300K, Red, Green, Blue
    Cuttable every 1”
    Beam Angle: 120° / Lumens/Ft=200 / CRI=80+
    UL Listing 2108
    5m (16.4’) Roll: $210.00     
    SPEC SHEET
    100’ Roll: $1,025.00

INDOOR Fluid View 60 LEDs/meter
Power: 12VDC, Max power = 1.44W/FT
Epistar 3528 SMD chip / 2000K, 2400K, 2700K, 3000K, 3300K, 3500K, 3800K, 4200K, 5000K 6300K, Amber
Cuttable Every 2”
Beam Angle: 120° / Lumens/F t =105 to 150 / CRI= 70 and 80+
UL Listing 2108
5m (16.4’) Roll: $125.00   
100’ Roll: $600.00

12v DD wet location 3528 th

Double Density-Wet 3528

OUTDOOR Blaze (IP68) 120 LEDs/meter
Power: 12VDC, Max power=2.88W/Ft                                       Max Run: 16.4FT                                                                      Cuttable every 1”
Epistar 3528 SMD chip  / 3000K, 6300K                                   UL Listing 2108
Beam Angle: 120° / Lumens/Ft=180 / IP68                                 
Price: $335.00 16.4ft/Rl     

12v outdoor 3528 th

OUTDOOR Fluid View (IP68) 60 LEDs/meter
Power: 12VDC, Max power = 1.44W/ft
Epistar 3528 SMD chip / 3000K, Amber
Cuttable every 2”
Beam Angle: 120° / Lumens/Ft = 100/69  CRI= 70
UL Listing 2108
16.4ft Roll: $215.00    
 

Architectural Grade Premium 24v02

Architectural Grade Premium 24v
Power: 24VDC, Max power = 2.09W/ft MAX RUN= 40’
Epistar 3014 SMD chip / 2700K, 3000K,  5000K / LEDs/ft = 18
Cutting points ~ 4”
Beam Angle: 120° / Lumens/F t =153-168 / CRI= 90+
UL Listed 2108.
40’ Roll: $500.00 

Double Row 3528

DD Double Row mounted in channel02

UL DD Double Row 3528 is our brightest 12 Volt low voltage tape lighting  solution. At 400 lumens per foot of dimmable 80+ CRI light output, it offers a combination of ultra high light output and high quality white light. It is available in 2700K and 3000K warm white options or 5000K  cool white light.
UL DD Double Row 3528 features two parallel high-density rows of high output LED lights that deliver an impressive 400 lumens per foot, capable of handling the most ambitious linear lighting demands. When used in  combination with our DUO Premium aluminum extrusion, the two  ETL DD Double Row 3528 tape lights side by side deliver double the output to 800 lumens per foot as a customizable length high output fixture (pictured below).
UL DD Double Row 3528 is indoor rated and field cuttable, and can be scaled or field altered to virtually any sized application while maintaining ETL Listing and integrity for inspection.  Five year limited warranty!

double row double density 3528 th

Double Density/Double Row
Indoor 3528

INDOOR VERSION 240 LEDs/meter
Power: 12VDC, Max power=5.75W/ft
Epistar 3528 SMD chip  / 2700K, 3000K, 5000K
Cuttable Every 1”
Beam Angle: 120° / Lumens/Ft=217-579 / CRI=80+
UL Listing 2108
9.5’ Roll: $185.00     

Kelvin Range th

KELVIN Range Chart

5050 White SMD LED th

5050 Very High Output

120v-led-tape-light

120v LED Strip Light

Pricing:                                   164Ft Roll $1500.00            65Ft Roll    $650.00                     Call For Custom Cuts

Double Blaze High Output

5050 Very High Output LED is a very high output LED tape light solution that delivers  360 lumens per foot of dimmable white light. 5050 Very High Output LED is available in a 12V or 24V form factor to provide power supply consistency when implemented with other home or commercial low voltage lighting projects. Both versions have identical light characteristics. Both are available in warm 3000K option or cool daylight 6300K white light. 5050 Very High Output LED is indoor rated and field cuttable, and can be scaled or field altered to virtually any application while maintaining the UL Listing for inspection.                              Spec Sheet

Very high output brightness - dimmable task or fill lighting
Warm through cool stepped white light color temperatures
Multiple run lengths
5050 Very High Output LED 12V: 16.4 foot single run
5050 Very High Output LED 24V: 20 foot single run
Field cuttable ETL Listing
5-Year Limited Warranty
Price: $290.00/16ft 12v roll *  $325.00/20’ 24v roll  * $1,250.00/100’ 24v roll

ILINE 120V LED Strip Light

ILINE 120V driverless strip light offers a trifecta of versatility. ILINE offers the combination of a high light output (230 lumens per foot), an extended individual run length (164 feet per single run), and an indoor/outdoor IP44 rating.
ILINE is available in multiple color options (3000k and 5000k white, red, green and blue) and excels for both indoor architectural accents and outdoor landscaping. The extended  single run length and driverless design offer simplicity of installation that significantly decreases installation labor costs. When environments are exposed to water or where having a smooth, cleanable light source is desirable, ILINE is an excellent choice.
ILINE offers an extended individual run length of 164 feet per single run.  Spools of 20 meters (65’ 6”) and 50 meters (164’ 2”) are shipped immediately.
ILINE can also be ordered in custom lengths, pre-cut, assembled  in 1 meter (39.4 in.) increments up to 164 feet. Every spool comes with a power plug with built in current rectifier, and no external driver or transformer is needed, 3 mounting clips, and 6 screws are included with every meter ordered. Additional power plugs and accessories are available for custom jobs.

ILINE is the perfect lighting solution for these applications:

  • Architectural affects
    Landscaping
    Long corridors
    Coves
    Indoor/outdoor pathways
    Stairways
    Patio/decks
    Restaurant/hospitality

Specifications:

Input Voltage: 120V AC
Power Consumption: 4.21W
Beam Angle: 120°
Maximum Run: 164 ft.
Environment: Wet/dry location
Warranty: 3 Years
Certification: UL Listed

Spec Sheet Download

HydroLight 24V UV & Salt Water Outdoor LED Strip Light

HydroLight Oudoor

HYDROLIGHT IP68 LED Strip Light

HYDROLIGHT, the only strip light that is waterproof, fully submersible, and UV resistant. It is constructed of UV-resistant and  corrosion-resistant materials designed specifically to perform in extreme environments. Now you can add brilliant lighting to areas with direct UV exposure, chlorine-treated water, or where exposure to saltwater and sea air make advanced corrosion resistance essential for performance and longevity. HYDROLIGHT has been tested and passed glow-wire flammability tests (GWFI index) at 650°C /1200°F, providing an extra level of safety for common  areas, hospitality, and areas of high fire risk.
HYDROLIGHT is factory sealed in lengths up to 81.5 feet in 7.08 inch increments.
HYDROLIGHT has been tested and passed glow-wire flammability tests (GWFI index) at 650°C /1200°F, providing an extra level of safety for common areas, hospitality, and areas of high fire risk.
Available in:

Standard WW (3500K) 46 lumens/ft, 1.13W/ft.  Maximum run: 81.5’
Standard Pure (6500K) 55 lumens/ft, 1.13W/ft.  Maximum run: 81.5’

Plus WW (3500K) 122 lumens/ft, 2.04W/ft.   Maximum run: 32.6’
Plus Pure (6500K) 134 lumens/ft, 2.04W/ft.   Maximum run: 32.6’

HydroLight

UV Resistant: No degradation or discoloration under direct sunlight
Saltwater Safe: Enhanced longevity in coastal or marine environments
Chlorine Resistant: Enhanced performance in treated water
IP68 Rated: Waterproof, fully submersible and weatherproof

Specifications:
Input Voltage:
24V DC
Power Consumption/ft: Coming Soon
Beam Angle: 120°
Max. Run: (Standard) 81.5 feet  (Plus) 32.6’
Environment: All environments
Warranty: 5 years
Certifications: UL Listed

Accessories

HydroLight Clip

Clip

HydroLight Spike
HydroLight Track

Track

Spike

HYDROLIGHT IP68 LED Strip Light

Channel for LED Tape

Premium Channel tracks
DD and Double Row 3528

Custom Fixtures Made Easy
When creating custom fixtures, our Channels allow you to match a fixture style with your choice of tape lighting.
Unique Mounting System
Unique snap-in mounting brackets promote swift, accurate mounting
Horizontal and vertical mounting supported
End-to-End Connector plugs for seamless long runs (excludes SLIM Channel)
The unique mounting system for the channels offers first try mounting accuracy and snap in quickness. The vertical mount option gives additional lighting placement options. To assist in creating longer fixtures, end-to-end channel connector plugs simplify alignment  and seamless connection of multiple channels.
Channels End-Caps complete the installation, adding a final touch to a finished, contemporary light fixture, made to perfectly fit in the  installation space.
Choose one of the four styles with a Clear or Frosted Channel Cover  (sold separately) to create a customized lighting fixture with a professional finished look.

Click to enlarge

Premium Channel tracks 1th

Channel Specifications

Premium Channel Connectors th

End Caps

Connectors

Premium Channel End caps
Premium Channel Styles

Pricing

chromapath-covers channels-parent-image__102 chromapath-premium-diffusion-slim

Slim - 48” Channel with 4 mounting clips and 2 end to end connector plugs

45 Degree - 48” Channel with 4 mounting clips and 2 end to end connector plugs

Square - 48” Channel with 4 mounting clips and 2 end to end connector plugs

Duo Channel - 48” Channel with 4 mounting clips and 2 end to end connector plugs

Channel Covers - 48” Clear or Frosted

Premium Frosted Cover -48”

Connector Plugs - 20 pack 

End Caps - 3 Pack (Includes 3 closed end and 3 open end caps)
         Premium End Caps - 10 Pack (Includes 10 closed end and 10 open end caps)          

$13.50 ea   Channel only: $12 each

$18.00 ea

$15.00 ea

$22.50 ea

$6.00 ea

$8.00 ea

$10.50 pack

$7.50 pack
$22.50 pack

Accessories for ETL LED Tape

12v-led-dimmer-switch

ETL12V/24V Dimmer Switches are low voltage dimmers that fit right into a standard wall light switch box. These dimmers are connected between the 12V or 24V DC power supply and 12V or 24V LED fixture and will dim any lights that are dimmable. These stylish dimmers come in an attractive  housing and are the ultimate LED retrofit accessory that allows you to  take advantage of the full range of brightness of dimmable LEDs. ETL Switches fit easily into a NEMA standard single-gang box, making it easy to create a seamless LED installation using your existing switch box

Our line of ETL Dimmer Switches includes two models: the Button  Slide and the Full Slide. The Button Slide dimmer features a compact slider and a button on/off switch and the Full Slide features an easy-to-grip slider and an on/off toggle switch. While most LED dimmers only dim to 40%, the ETL offers a full 0-100% dimming range, with no flickering, humming, or jumping.

Length: 4.15 in., Width: 1.75 in., Depth: 1.7 in.
Input Voltage: 12V-24V DC
Output Voltage: 12V-24V DC
Max. Load: 100W
Switch Type: electronic low voltage
PWM Dimming Range: 100% - 0%      Wiring Diagram
Price: $50.00 Each

inline-motion-sensor-switch

Infrared On/Off Switch
This sleek and low profile on/off switch responds to the slightest change in the infrared light spectrum and turns on the light when you open a closet or cabinet and turns off when the door is closed.
2 year warranty
Load Limit: 36W (12V), 72W (24V)                                                    Price: $25.00 each

touchdial-system-202
attribute-colorchanging-system02
rgbw-touch-dmx512-wall-control-panel-103

Wireless Controller for LED Ribbon

The new TOUCHDIAL zone control system controls single color, K-RANGE,  and RGB(W) LED lighting via mobile device and additional touch sensitive controls. This color control system is used for medium to large-scale  lighting projects and can be expanded exponentially with the use of the TOUCHDIAL WiFi Hub. Now you can easily integrate into your existing WiFi network for ultimate lighting authority. This control system is expandable up to 8 zones when using the WiFi Mobile App, allowing zones to perform seamlessly in commercial or residential installations.

Features:
USB rechargable RF remote control, Remote range up to 95 ft.
Price: Receiver: $95.00 RGBW Remote: $85.00    Tuneable White Remote: $105.00 WiFi Hub: $120.00
          
.

Attribute LED Controller

The ATTRIBUTE Color Controller for RGB and RGB(W) LED lighting is  affordable, flexible, and easy to install. This single zone control  system makes adding color to any environment effortless.                                                                                          Input Voltage: DC 12V 24V
output current: <5A (each channel)
Price: $75.00 ea

Input Voltage: 12~24V DC
MaximumOuput Power:                    60W/ 120W(12V/24V)
Environment: Indoor/ dry location
Warranty: 3Year

DMX Wall Mount Controller

DMX wall-mounted color control systems provide professional-level  control of color-changing RGB and RGBW LED lighting in one or multiple independent areas.

Price: $175.00

ClickTight Connectors

ClickTight Flexible Extension ClickTight Connector open
clicktight-strip-light-splice-connector
ClickTight Connector closed

The CLICKTIGHT ETL Tape Light Connector performs as a simple, secure  connection. This  connector accessory eliminates the need to solder, and is more secure than the standard Tape Light Connector. It features a special strip  light locking connector at one end and optional opposite ends for a DC Plug, Spliced leads, or another locking connector for strip-to-strip connections.

ClickTight Connectors

RGB ETL splice connector
RGB ETL 3” flexible extension
RGB ETL 12” flexible extension
Single color ETL 3528 splice connector
Single color ETL 3” 3528 flexible extension
Single color ETL 5050 splice connector
Single color ETL 5050  3” flexible extension

$3.00 ea
$3.25 ea
$4.25 ea
$3.00 ea
$3.25 ea
$3.00 ea
$3.25 ea

Home

Fiber Optic Lighting

Other Lighting

Accessories
Basics of Fiber Optic Lighting
Catalog
Ceiling Light Fixtures
Color Wheels
Cove Lighting
Design Page
Do-It-Yourself Kits
End Piece Fixtures
End Emitting Cable
Fixtures
Fiber Optic Cable
Fiber Optic Curtains

Fiber Guide
General Cable Description
Glass Block Wall
Illuminators
LED Illuminators
Small LED Illuminators
Installing Cable
Landscape Fixtures
LED Mini-light Kits
Pools & Spas
Showcase
Side Emitting Cable
Starfield Ceilings
Starfield Installation

Architectural
Lasers
Laser Starfield
LED Flexible Ribbon
LED I-Panel
LED Lighting
LED RGB Lighting
LED Signage
LED Street Lights
LED Flexible Neon
LED Par Cans
LED Stage Lighting
Rope Light
UV Lighting
Multi Pars

Updated 5/11/16

Special Effects

DJ Special Effects
Fog Machines
Mirror Balls
Flame Special Effects
Specialty Tracks

Terms and Conditions

Links